MTE Solutions Catalog

Performance Specifications Service Load Condition Load: 6-pulse rectifier only Input Voltage † 380V - 415V +/- 10%; 50 + 0.75Hz; 3-phase Current Range 6A - 320A (1.5 KW - 150 KW) Maximum THID* 8% @ full load 12% @ 40% load Maximum Ambient Temperature -40C to +50C open panel filters -40C to +90C storage Insertion Loss @ Full Load ‡ <5% Efficiency >98% Altitude Without Derating 3,300 feet above sea level Relative Humidity 0% to 95% non-condensing Current Rating 150% for 1 minute duration Fan Life Expectancy 80,000 hours @ 40C Product specifications subject to change at anytime. * On systems with a DC link choke or reactor. † Also available in 380V;60Hz. Contact MTE for details. ‡ Insertion loss for the 380V;60Hz version can measure up to 6-7%. The Matrix ® APAX Harmonic Filter can be specified for use on the input of your VFD or other 6-pulse rectifier power supply to meet the 10%–15% requirement for harmonic distortion. Improves system efficiency and reliability Helps extend service Alleviates system downtime The convenient, easy-to-install solution for harmonic filtering. • Determine voltage and frequency required • Reference motor nameplate to determine motor HP or kW and Full Load Amps • Select filter based on Motor Full Load Amps Do not exceed filter’s maximum current rating (amps) • Determine derating requirements Reference Performance Specifications table on previous page How to properly size your filter Understanding the Matrix ® APAX Part Number: Voltage Frequency Code C 380 – 415 Volts 50 Hz Enclosure Type P = Panel Mount (No Enclosure) Current Rating 0006 is 6 Amps 0083 is 83 Amps 0320 is 320 Amps Matrix ® APAX MX P _ _ _ _ C Matrix ® APAX Harmonic Filter comes standard with field installable contactor options. Matrix ® APAX Options Contactor Wiring Option: Opens capacitors under light load conditions • User configurable wiring block (See image below) • Allows for user to disconnect option to meet their application • Shipped with factory installed jumpers that must be removed for installation of contactor option 38