MTE Solutions Catalog

The Matrix ® E-Series harmonic filter meets the international harmonic distortion requirement of 10%- 15% while also supporting the compliance of IEEE-519. Patented design with reliable components provides harmonic mitigation and reduced THID (Total Harmonic Distortion) where you need it most. Affordable solution that is easy to install and maintain. Improves system efficiency and reliability to lower total cost. Helps extend service life of electrical equipment and transformers. Alleviates system downtime by preventing blown fuses and tripped circuit breakers. Power quality you’ve come to expect from the power quality experts. Performance Specifications Service Load Condition Load: 6-pulse rectifier only Input Voltage 380V - 415V +/- 10%; 50 + 0.75Hz; 3-phase 480V +/- 10%; 60 + 0.75Hz; 3-phase Current Range 6A - 320A (1.1 KW - 150 KW; 3HP - 250HP) Maximum THID With DC Link Choke or Reactor 8% @ full load; 12% @ 40% load Without DC Link Choke or Reactor 12% @ full load; 17% @ 40% load System Power Conditions at Rated Power THVD: <3% Line Voltage Unbalance: <1% Source Impedance Maximum: 6% Minimum: 1.5% Maximum Output Voltage at No Load (RMS Peak) +5% Minimum Output Voltage at Full Load (RMS Peak) -5% Service Factor 1.00 Maximum Ambient Temperature -40C to +50C open panel filters -40C to +90C storage Insertion Loss @ Full Load <5% Efficiency >98% Altitude Without Derating 3,300 feet above sea level Relative Humidity 0% to 95% non-condensing Current Rating 150% for 1 minute duration Product specifications subject to change at anytime. Matrix ® E-Series Matrix ® E-Series Filters Utility Power VFD Matrix ® E-Series Harmonic Spectrum Chart 42