SECTION
DRY-TYPE DISTRIBUTION TRANSFORMERS
ACME ELECTRIC
•
MILWAUKEE, WI
•
800.334.5214
•
acmetransformer.com
14
316 STAINLESS STEEL
TRANSFORMERS
FEATURES
n
3R enclosure.
n
Encapsulated construction.
n
Single phase: 0.25 – 25 kVA.
Three phase: 3 – 7.5 kVA.
n
Core and Coil assembly completely encapsulated in
polyester or epoxy seals out all moisture, eliminating
corrosion and deterioration of insulation.
n
Electrostatic shielding.
APPLICATIONS
n
Harsh industrial locations
n
Corrosive chemical exposure
n
Waste water treatment facilities
n
Coastal or marine applications with high salt mist
n
Any application where painted cold roll steel is not adequate
Shielded Power in Many Design Styles
ENCAPSULATED THREE PHASE 3 to75 kVA
FEATURES
n
UL listed, CSA certified and UL-3R enclosure
meets
or exceeds all listing criteria including NEMA, ANSI and
OSHA standards.
n
UL Class
180°C insulation system. 115°C rise.
n
Extra
large front access wiring compartment through 9 kVA;
top access through 75 kVA for easier installation and cooler
case temperatures.
n
Completely enclosed
— suitable for indoor/outdoor
service. Consult selection charts for details. Excellent for
dust or lint laden atmosphere.
n
Encapsulated
— electrical grade silica and resin
compound completely encloses the core and coil.
Encapsulation seals out all moisture and air, eliminating
corrosion and insulation deterioration.
n
High efficiency
and excellent regulation.
n
Sound levels
below NEMA standards.
n
Keyhole mounting slots
permit installation of mounting
bolts prior to hanging transformer and are accessible from
the front. Lifting ears for easy installation.
n
Wiring connections
can be made outside of wiring
compartment due to the use of flexible leads.
n
3-9 kVA
provided with dual size knockouts in sides and
bottom of wiring compartment.
n
Termination
— copper lead wire.
n
Electrostatic shielding
provided on all 60 Hz isolation
transformers.
NOTE:
Units above 15 kVA apply to Groups F and K.