bepmarine.com BATTERY MANAGEMENT 24 Twin Engine, Three Banks This system is designed for twin engine installations. It will allow the port engine to charge the port start battery and the house battery when the DVSR is engaged. It will also allow the starboard engine to charge the starboard start battery and the house battery when the starboard DVSR is engaged, giving a combined charge from two engines into the house battery until the voltage regulators on both engines control the charge. It will also allow the house battery to be charged if steaming on one engine. See table below for specifications. Part # 717-140A-DVSR Triple Engine, Four Banks This system is designed for triple engine installations. Once again using multiple DVSRs off each start battery giving combined charge from all three engines into the house battery via DVSRs. See table below for specifications. Part # 719-140A-DVSR Dimension guide Clusters are made from uniformly square switches, each side 2.7" (69 mm) Specifications Engine Type Battery (banks) DVSR Orientation Part # LxWxH in LxWxH mm Single inboard or outboard 2 yes vertical 714-140A-DVSR 5.4" x 2.75" x 3" 138 x 69 x 75mm yes horizontal 716-H-140A-DVSR 10.85" x 2.75" x 3" 276 x 69 x 75mm yes vertical 716-V-140A-DVSR 10.9" x 2.7" x 3" 276 x 69 x 75mm yes square 716-SQ-140A-DVSR 5.4" x 5.4" x 3" 138 x 138 x 75mm no horizontal 715-H 8.1" x 2.75" x 3" 207 x 69 x 75mm no vertical 715-V 2.75" x 8.1" x 3" 69 x 207 x 75mm Twin inboard or outboard 2 no horizontal 715-S 8.1" x 2.75" x 3" 210 x 69 x 75mm Twin inboard 3 yes horizontal 718-140A-DVSR 8.1" x 5.4" x 3" 207 x 138 x 75mm Twin outboard 3 yes horizontal 717-140A-DVSR 5.4" x 8.1" x 3" 138 x 207 x 75mm Triple outboard 4 yes square 719-140A-DVSR 8.1" x 8.1" x 3" 207 x 207 x 75mm DVSR Charging Current: 125A continuous Battery Switch Rating: 275A continuous See page 27 for panel versions
RkJQdWJsaXNoZXIy MjgzMDI=