marinco.com POWER CONVERSIONS 51 Guest ChargePro™ Series Selection ChargePro 5A to 20A Models Designed for demanding 12V, 24V, 36V and 48V battery systems requiring 10per battery for the fastest charge times. Fan Expanded LED display Model ChargePro 5 ChargePro 4/4 ChargePro 10 ChargePro 5/5 ChargePro 5/5/5 ChargePro 10/10 Part # 2708A 2707A 2710A 2711A 2713A 2720A Input Volts 90-135V AC 50/60Hz 90-135V AC 50/60Hz 90-135V AC 50/60Hz 90-135V AC 50/60Hz 90-135V AC 50/60Hz 90-135V AC 50/60Hz DC System Voltage 12 12/24 12 12/24 12/24/36 12/24 Banks 1 2 1 2 3 2 Amps 5 4/4 10 5/5 5/5/5 10/10 Amps Per Bank 5 4 10 5 5 10 AC Cord Length 6' 6' 6' 6' 6' 6' Size (W x H X L) 7.5" x 2.4" x 7.2" 191 x 61 x 183 mm 7.5" x 2.4" x 9.0" 191 x 61 x 229 mm 7.5" x 2.4" x 9.0" 191 x 61 x 229 mm 7.5" x 2.4" x 9.0" 191 x 61 x 229 mm 7.5" x 2.4" x 12.9" 191 x 61 x 328 mm 7.5" x 2.4" x 12.9" 191 x 61 x 328 mm Weight (lbs) 3.2 4.5 4.2 4.7 6.7 6.6 Model ChargePro 10/10/10 ChargePro 10/10/10/10 Part # 2731A 2740A Input Volts 90-135V AC 50/60Hz 90-135V AC 50/60Hz DC System Voltage 12/24/36 12/24/36/48 Banks 3 4 Amps 10/10/10 10/10/10/10 Amps Per Bank 10 10 AC Cord Length 6' 6' Size (W x H X L) 9.0" x 4.1" x 8.7" 229 x 104 x 221 mm 9.0" x 4.1" x 8.7" 229 x 104 x 221 mm Weight (lbs) 8.0 8.5 Heavy-Duty Strain Reliefs ChargePro 30A and 40A Models Fully Automatic Multi-Stage Performance Charging Overview Chargepro’s 5-Stage Performance Charging Algorithm is Fully Automatic and Designed to Maximize Battery Performance and Extend Battery Life. Stage 1 - Analyze Mode: AC power is applied. ChargePro’s red charging LED will flash indicating it is analyzing individual wiring connections for proper connection/polarity and that each battery is over 4.0V DC and capable of accepting a precharge. When completed, any errors will trip a battery specific red fault LED, or if no faults are present the red charging LED will illuminate solid red. Stage 2 - Precharge Mode: For batteries under 10V, this mode is designed to pulse the battery up to 10V before accepting full rated constant current (Stage 3). During this mode the red charging LED will be illuminated with a solid on. Stage 3 - Charging Mode Constant Current: During this mode the red charging LED will be illuminated with a solid on indicating each battery is being charged in constant current mode as controlled by temperature until the battery voltage is raised to a precise 14.6V DC and the red charging LED will shut off. Stage 4 - Conditioning Mode Constant Voltage: During this mode the amber conditioning LED will be solid on indicating each battery is being is being conditioned at 14.6V for up to 3 hours until the battery is fully charged. Followed by the amber LED turning off while the charger enters into Stage 5. Stage 5 - Storage Recondition Mode: During this mode the blue AC power and green auto maintain LED will be solid on indicating each battery is being monitored while the charger is in standby mode consuming little to no power until the battery drops under 12.8V (fully charged) and the charger will turn on and auto maintain the battery in a fully charged state. This is fully automatic and safe for short and long term storage. Related Products Cable Extender page 55 AC Plug Holder page 54
RkJQdWJsaXNoZXIy MjgzMDI=