marinco.com VENTILATION 99 MiniVent 1000 The MiniVent 1000 is the smallest and most economical solar vent in the Marinco® line. At just 7" in diameter and approximately 1-3/4" high, the MiniVent 1000 is compact yet effective. This solar powered model is an exhaust vent only. It will keep the boat cabin cool when you need it most, during the hot sunlight hours. Under solar power, the MiniVent 1000 will move 700 cubic feet of air an hour. At night, even a light breeze will continue to ventilate the boat passively. Built-in shut-off damper prevents water intrusion in rough seas. Fits a 3-3/4" diameter installation hole. The vent can be retrofitted to an existing hole of up to 6" in diameter. Available in white ABS plastic or stainless steel. Optional stainless steel cover is also available separately. • Solar powered exhaust ventilation during daylight and passive exhaust at night • No batteries or wiring required • Whisper-quiet fan operation • Durable white ABS construction • Shut-off damper to prevent water intrusion in rough seas • Dimensions: 7" diameter X 1-3/4" high • All MiniVent 1000 models come complete with white plastic interior trim ring, mounting hardware and an easy-to-understand installation manual Air Vent 500 Passive Exhaust Ventilation Marinco® offers the AirVent 500 as a non-solar ventilation option that can passively move 600 to 1,000 cubic feet of air per hour in a 15 knot breeze. Marinco's engineering expertise created this vent to be strong, compact and effective. The AirVent 500 is an economical way to provide ventilation in your boat or it can be used in conjunction with other solar powered or 12V vents to create cross flow air circulation. • Compact size: 7" diameter x 1-3/4" high • High air flow volume 1,000 cu. ft./hour in a 15 knot breeze • Strong U.V. stabilized white ABS construction • Center panel is translucent plastic allowing light to pass through it below deck • Center damper shuts vent off from below • Easy installation – attaches directly to deck in compact 3-3/4" diameter hole and can be retrofitted to an existing hole of up to 6" in diameter Part # N28810 Description Part # 3" White N20020 3" Stainless Steel N20030
RkJQdWJsaXNoZXIy MjgzMDI=