46 DC MANAGEMENT Easyfit™ Battery Switch ParkPower® has listened to its customers and has responded to feedback concerning some installations where switches need to be recessed through varying thicknesses of panels. The 700RV Easyfit switch achieves this through an easily removable threaded ring allowing for panel thicknesses up to 3/4" (19 mm). This durable switch is designed with a removable key 45° past the off position, labeled handle and a removable back cover covering exposed terminals. The switch can also be surface mounted offering a unique style compared to other switches available on the market. The 700RV Easyfit can easily be retrofitted in place of most European post and lever type switches. 700RV Contour Heavy-Duty Master Switch The Contour Heavy Duty Master switch is rated at 600 amps continuous and 2500 amps cranking, it is well suited for higher power loads. The 720RV can be recessed or surface mounted. The 720RV also includes the same style removable side plates and back plate as the 701RV series. 720RV Battery Master Switches Unique to the Chassis and House Battery Master Switches is the patented contour lock system, allowing the switches to be used as stand alone units, or locked together with other switches. The switches also feature a control knob which cannot be removed while in the ON or OFF position, but it can be removed by switching to an anti-clockwise 45° position. The switches also feature removable side plates on 4 sides for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. 701CHRV Chassis battery 701HBRV House battery Specifications • Continuous Rating: 275A DC • Intermittent Rating: 455A DC • Cranking Rating: 1250A DC • Voltage Rating: 48V DC • Operation: On / Off • Recessed or Surface Mount • Ignition Protected • Termination Stud Size: 3/8" (2 x 10 mm) • Dimensions: 2.75 x 2.75 x 3" H (69 x 69 x 75 mm H) • Tin plated copper studs and nuts Specifications • Continuous Rating: 275A DC • Intermittent Rating: 455A DC • Cranking Rating: 1250A DC • Voltage Rating: 48V DC • Operation: On/Off • Mounting: Recessed via 7/8" hole or Surface • Termination Stud Size: 3/8" (2 x 10 mm) • Tin plated copper studs and nuts • Ignition protected Specifications • Continuous Rating: 600A DC • Intermittent Rating: 800A DC • Cranking Rating: 2500A DC • Voltage Rating: 48V DC • Operation: On / Off • Recessed or Surface Mount • Ignition Protected • Termination Stud Size: 1/2" (2 x 12 mm) • Dimensions: 1 x 2.75 x 3" H (102 x 102 x 90 mm H) • Tin plated copper studs and nuts 701HBRV 701CHRV park-power.com
RkJQdWJsaXNoZXIy MjgzMDI=