ELECTRIC TRIM TAB KITS 11 lencomarine.com 11" (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length 13.5" (34.29 cm) height needed for actuator in 9" (22.86) tab length 12" (30.48 cm) Edge Mount Trim Tab Kits 12V System Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a ½" (1.3 cm) lower mounting height on 9" (22.9 cm) long blades & 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style. Boat lengths 14' (4.3 m) to 36' (11 m) Electro-Polished Edge Mount Trim Tab Kits 12V System All the same features of the Edge Mount series with the addition of Electro-Polished blades. Electro-Polish adds a mirror finish and the ultimate corrosion protection. Actuator mounts at the trailing edge of these 12" (30.5 cm) blades giving them a 3" (7.6 cm) lower mounting height. Boat Lengths 14' (4.3 m) to 30' (9.1 m) Part # L" X W" Boat Length Hinge Height Min.Transom Height Retail Box 15013-101 9" x 9" 14'–18' 2" (5.1 cm) 13.5" (34.3 cm) Yes 15014-101 9" x 12" 16'–25' 2" (5.1 cm) 13.5" (34.3 cm) Yes 15015-101 12" x 9" 14'–18' 2" (5.1 cm) 11" (27.9 cm) Yes 15016-101 12" x 12" 17'–30' 2" (5.1 cm) 11" (27.9 cm) Yes 15017-101 12" x 18" 26'–36' 2" (5.1 cm) 11" (27.9 cm) – 15016-101 15116-101 Part # L" X W" Boat Length Hinge Height Min Transom Height Retail Box 15115-101 12" x 9" 14'–18' 2" (5.1 cm) 11" (27.9 cm) Yes 15116-101 12" x 12" 17'–30' 2" (5.1 cm) 11" (27.9 cm) Yes Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge, & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with a 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Kits include: • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware Kits include: • (2) 12-gauge stainless steel Electro-Polished blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware 3/4" (1.9 cm) 3/8" (.95 cm) 11" (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length 12" (30.48 cm) Edge Mount Retail Box See check-list below Retail Box See check-list below Edge Mount = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Switch kits sold separately See pages 30–32 Switch kits sold separately See pages 30–32
RkJQdWJsaXNoZXIy MjgzMDI=