ELECTRIC TRIM TAB KITS 12 lencomarine.com = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Complete Edge Mount Trim Tab Kits 12V System Everything you need in one box! The Edge Mount trim tab kit with the added benefit of having the integrated switch choice & power connector all included. Boat lengths 17' (5.2 m) to 30' (9.1 m) Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 5/8" (1.6 cm) flared trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Switch included. Kits include: • (1) Switch Kit - Choose Double Rocker, Standard Integrated or LED Integrated • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Switch included. Kits include: • (1) Switch Kit - Choose Double Rocker, Standard Integrated or LED Integrated • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware 5/8" (1.59 cm) 3/8" (.95 cm) 9" (22.86 cm) 14" (35.56 cm) max. height needed for actuator 3/4" (1.9 cm) 12" (30.48 cm) Standard Mount Retail Box Packaged with all kits shown Retail Box Packaged with all kits shown Complete Standard Trim Tab Kits 12V System Everything you need in one box! The Standard trim tab kit with the added benefit of having the integrated switch choice & power connector all included. Boat lengths 16' (4.9 m) to 30' (9.1 m) Part # L" X W" Kit Description Switch Kit Included 15101-104 9" x 12" Standard Double Rocker Switch 15104-102 9" x 12" Standard Standard Integrated Switch 15108-103 9" x 12" Standard LED Integrated Switch 15103-104 12" x 12" Standard Double Rocker Switch 15105-102 12" x 12" Standard Standard Integrated Switch 15109-103 12" x 12" Standard LED Integrated Switch Part # L" X W" Kit Description Switch Kit Included 15102-104 12" x 12" Edge Mount Double Rocker Switch 15106-102 12" x 12" Edge Mount Standard Integrated Switch 15110-103 12" x 12" Edge Mount LED Integrated Switch 3/4" (1.9 cm) 3/8" (.95 cm) 11" (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length 12" (30.48 cm) Edge Mount 3 switches to choose from: Double Rocker Standard Integrated LED Integrated 3 switches to choose from: Double Rocker Standard Integrated LED Integrated
RkJQdWJsaXNoZXIy MjgzMDI=