ACTUATORS & HATCH LIFTS 39 lencomarine.com Lenco Electric Hatch Lifts L.O.A. = Length overall, measuring from top bracket to bottom bracket 12 Volt Models Part # Superseded Part # Approximate L.O.A. Retracted Approximate Stroke Approximate L.O.A. Extended 20760-001 HL-400 15" (38.1 cm) 4" (10.1 cm) 19" (48.3 cm) 20762-001 HL-600 20" (50.8 cm) 6" (15.2 cm) 26" (66.0 cm) 20764-001 HL-800S 20" (50.8 cm) 8" (20.3 cm) 28" (71.1 cm) 20766-001 HL-800 24" (60.9 cm) 8" (20.3 cm) 32" (81.2 cm) 20768-001 HL-1200S 24" (60.9 cm) 12" (30.5 cm) 36" (91.4 cm) 20770-001 HL-1200 29" (73.7 cm) 12" (30.5 cm) 41" (104 cm) 20774-001 HL-1600S 29" (73.7 cm) 16" (40.6 cm) 45" (114 cm) 20776-001 HL-1600 33" (83.8 cm) 16" (40.6 cm) 49" (124 cm) 20778-001 HL-2000S 33" (83.8 cm) 20" (50.8 cm) 53" (134 cm) 20780-001 HL-2000 37" (93.9 cm) 20" (50.8 cm) 57" (144 cm) 20782-001 HL-2400S 37" (93.9 cm) 24" (60.9 cm) 61" (154 cm) 20784-001 HL-2400 41" (104 cm) 24" (60.9 cm) 65" (165 cm) 20786-001 HL-2600 47" (119 cm) 26" (66.0 cm) 73" (185 cm) 20788-001 HL-3000 47" (119 cm) 30" (76.2 cm) 77" (195 cm) 24 Volt Models 20761-001 HL-400/24V 15" (38.1 cm) 4" (10.1 cm) 19" (48.3 cm) 20763-001 HL-600/24V 20" (50.8 cm) 6" (15.2 cm) 26" (66.0 cm) 20765-001 HL-800S/24V 20" (50.8 cm) 8" (20.3 cm) 28" (71.1 cm) 20767-001 HL-800/24V 24" (60.9 cm) 8" (20.3 cm) 32" (81.2 cm) 20769-001 HL-1200S/24V 24" (60.9 cm) 12" (30.5 cm) 36" (91.4 cm) 20771-001 HL-1200/24V 29" (73.7 cm) 12" (30.5 cm) 41" (104 cm) 20775-001 HL-1600S/24V 29" (73.7 cm) 16" (40.6 cm) 45" (114 cm) 20777-001 HL-1600/24V 33" (83.8 cm) 16" (40.6 cm) 49" (124 cm) 20779-001 HL-2000S/24V 33" (83.8 cm) 20" (50.8 cm) 53" (134 cm) 20781-001 HL-2000/24V 37" (93.9 cm) 20" (50.8 cm) 57" (144 cm) 20783-001 HL-2400S/24V 37" (93.9 cm) 24" (60.9 cm) 61" (154 cm) 20785-001 HL-2400/24V 41" (104 cm) 24" (60.9 cm) 65" (165 cm) 20787-001 HL-2600/24V 47" (119 cm) 26" (66.0 cm) 73" (185 cm) 20789-001 HL-3000/24V 47" (119 cm) 30" (76.2 cm) 77" (195 cm) Hatch Lift Features • Clear anodized aluminum tubing • Sizes 4" (10.1 cm) through 30" (76.2) stroke and available in 12V & 24V • Complete with 2' (61 cm) lead and Deutsch plug (see actuator extension harnesses on page 42) • Clutchless ball screw design will not drift, never binds and runs in sync on dual lift applications • In-line motor design delivers 500 lbs. (226.79 Kg) of force • Water-resistant and made entirely of non-corrosive materials • Ball screw spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors • High impact, corrosion proof mounting brackets with stainless steel pull pins • Powdered metal gears for strength and precision • Stainless steel ram locks in any position • CE-certified, ignition protected and ABYC compliant Optional Hatch Lift accessories available 6.25" (15.9 cm) Stainless Steel Pull Pin Clamshell packaged 60101-001D ATTENTION 20A circuit breaker & 20A rated switch required. Hatch Lift Rocker Switch (Single) 12 & 24 Volt | Single Hatch Lift Application Rocker Switch for hatch lifts with two 30" non-terminated power leads. This switch is CE certified and ABYC compliant. It is also 20A rated and clam shell packaged. 15096-001 Hatch Lift Rocker Switch (Dual) 12 & 24 Volt | Dual Hatch Lift Application Rocker Switch for hatch lifts with two 30" non-terminated power leads. This switch is CE certified and ABYC compliant. It is also 20A rated and clam shell packaged. 15098-001 Stainless Steel Non-locking Slide Bracket For hatch lifts. In case of power failure, this bracket allows you to pull the hatch open a minimum of 5" (12.7 cm) in order to remove bolt for access. 70381-001
RkJQdWJsaXNoZXIy MjgzMDI=