117 CONNECTORS bluesea.com Terminal Feed Through Connectors Eliminates chafe and provides strain relief when passing high current through hulls, decks and bulkheads • Protects large cables that are subject to chafing when passed through holes • The large terminals have a mounting face that can be gasketed or bedded to provide a water-tight installation • One-piece serrated flange nut ensures correct and secure connections Specifications Stud Material Tin-Plated Copper Alloy Mounting Holes Accepts #10 (M5) Screws Regulatory Rated IP66 - protected against powerful water jets • One-piece serrated flange nuts ensure correct and secure connections Specifications Continuous Rating Not rated—amperage flows between terminals stacked on post and is determined by wire and terminals used. Voltage Max. Operating 48V DC Mounting Holes Accepts #8 Screws (2010, 2011) Accepts 1/4" Screws (2001, 2002, 2003) Regulatory E certified 2010, 2011 0.832" 21.13mm 1.063" 26.99mm 1.625" 41.28mm 1.75" 44.45mm 2.50" (63.50mm) 3.30" (83.82mm) 2010 2003 Part# Terminal Stud 2010 #10-32 × 5/8" 2011 1/4"-20 × 3/4" 2001 1/4"-20 × 1-1/16" 2002 5/16"-18 × 7/8" 2003 3/8"-16 × 7/8" 2017 2103 • 150 Amp bus allows small wire connections at high amperage cable connections • One-piece serrated flange nut ensures correct and secure connections Specifications Continuous Rating 150A DC Voltage Max. Operating 48V DC Mounting Holes Accepts 1/4" Screws Bus Material Tin-Plated Copper Regulatory E certified Part# Terminal Stud Terminal Screws 2101 1/4"-20 × 1" 8 × #8-32 2102 5/16"-18 × 3/4" 8 × #8-32 2103 3/8"-16 × 3/4" 8 × #8-32 2.75" 69.85mm [A] [B] 0.75" 19.05mm 1.75" 44.45mm 1.25" 31.75mm 1.875" 47.63mm 1.50" 38.10mm Part# Terminal Studs Insulating Cover Stud Height A in (mm) Stud Height B in (mm) 2016 2 × 5/16"-18 Yes 1.50 (38.1) 1.50 (38.1) 2016100 2 × 5/16"-18 –– 1.50 (38.1) 1.50 (38.1) 2017 2 × 3/8"-16 Yes 1.63 (41.3) 1.63 (41.3) 2017100 2 × 3/8"-16 –– 1.63 (41.3) 1.63 (41.3) 2018 1 × 5/16"-18, 1 × 3/8"-16 Yes 1.50 (38.1) 1.63 (41.3) 2018100 1 × 5/16"-18, 1 × 3/8"-16 –– 1.50 (38.1) 1.63 (41.3) PowerPost Cable Connectors Insulated single stainless steel stud terminates multiple large conductors PowerPost Plus Cable Connectors Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit Dual PowerPost Cable Connectors Provides a termination point for extending the length of outboard harnesses or other conductors • Designed for connecting high amperage conductors • 2018 is also designed for outboard engine installation when factory cables need to be extended • One-piece serrated flange nuts ensure correct and secure connections Specifications Continuous Rating Not rated—amperage flows between terminals stacked on post and is determined by wire and terminals used. Voltage Max. Operating 48V DC Mounting Holes Accepts #10 (M5) Screws 2001–2003 Part# Terminal Stud Amps Volts Color 2201 5/16"-18 250A 48V Black 2202 5/16"-18 250A 48V Red 2203 3/8"-16 250A 48V Black 2204 3/8"-16 250A 48V Red 2201 2202 2.0" 50.80mm 1.313" 33.34mm 1.25" 31.75mm 1.285" 32.64mm 1.84" 46.74mm 0.313" 7.94mm 0.689" 17.50mm 0.869" 22.06mm 0.86" 21.84mm For mounting in 0.875" hole
RkJQdWJsaXNoZXIy MjgzMDI=