66 BATTERY MANAGEMENT bluesea.com Switch Type Single Circuit ON-OFF Selector 3 Position Function Switches a single battery to a single load group Switches isolated battery banks to all loads Switch Family Battery Mount M Series E Series HD Series* M Series E Series HD Series Part# 5990 6004 6005 6006 9004E 3001 6008 11001 11003 Battery Inputs 1 1 2 Switch Positions 2 2 3 Battery Combine –– –– –– Make Before Break Contact N/A N/A N/A N/A Cranking Rating (30 sec.) 450A 900A 1,200A 1,750A 900A 1,200A 1,600A Intermittent Rating (5 min.) 225A 500A 600A 900A 500A 600A 700A Continuous Rating 150A 300A 350A 600A 300A 350A 500A Voltage Maximum Operating 32V DC 48V DC 48V DC 32V DC 32V DC Width in (mm) 1.55" (39.3 mm) 2.83" (72 mm) 3.85" (98 mm) 2.83" (72 mm) 3.85" (98 mm) Height in (mm) 1.36" (34.6 mm) 2.83" (72 mm) 3.85" (98 mm) 2.83" (72 mm) 3.85" (98 mm) Mounting Centers N/A 2.18" (55 mm) 3.00" (76 mm) 2.18" (55 mm) 3.00" (76 mm) Mounting 5990 - 3/8" (9.53mm) 5991- Battery Post #10 (M5) Screws 1/4" (M6) Screws 1/4" (M6) Screws Terminal Stud Size 5/16"-18 (M8) 3/8"-16 (M10) 1/2" (M12) 3/8"-16 (M10) 1/2" (M12) Terminal Stud Length 5/8" (15.9 mm) 7/8" (22 mm) 7/8" (22 mm) Max. Terminal Stud Torque 100 in-lb (11.30 N-m) 120 in-lb (13.56 N-m) 140 in-lb (15.82 N-m) 220 in-lb (24.86 N-m) 120 in-lb (15.82 N-m) 140 in-lb (15.82 N-m) 220 in-lb (24.86 N-m) Terminal Stud Material Stainless steel Tin-plated copper Tin-plated copper Cable Size to Meet Ratings ‡ 1 AWG (50 mm²) 4/0 AWG (120 mm²) 4/0 AWG (120 mm²) Cable Clearance for 4/0 Cables N/A 1.12" (28.4 mm) 1.10" (27.9 mm) 1.12" (28.4 mm) 1.10" (27.9 mm) Ignition Protected SAE J1171 UL 1500, SAE J1171 UL 1500, SAE J1171 Ingress Protected IP54 IP66 IP66 Operation Diagrams These diagrams are intended for reference of how the switches operate and are not wiring diagrams. Consult an electrical professional for system design and circuit protection. * Includes Alternator Field Disconnect (AFD) protects the diodes in the alternator in the event of the switch being switched to the OFF position while the engine is running. If the AFD is not used to protect the alternator, an LED can be connected to the AFD terminals to indicate when the battery switch is in any position but OFF. ‡ Reducing cable size will reduce current rating Manual Battery Switch Specification Table Switch set to ON Switch set to 1 Switch set to 2 With Lockout Switch set to ON
RkJQdWJsaXNoZXIy MjgzMDI=