78 BATTERY MANAGEMENT bluesea.com Product Type Solenoid Switches Remote Battery Switches (RBS) Function Provides high-amp switching Provides high-amp switching with manual override Product L Series Solenoid ML Solenoid ML Solenoid ML RBS ML RBS ML RBS ML RBS Part# 9012 7701 7703 7700 7702 7713 7717 Manual Control –– –– Yes Nominal Voltage 12V/24V DC 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC Cranking Rating (30 sec.) 1,000A DC 1,450A DC 1,450A DC Intermittent Rating (5 min.) 400A DC 700A DC 700A DC Continuous Rating 300A DC 500A DC 500A DC Amperage Operating Current - continuous @ 25°C nominal VDC 0.13A @ 12V DC 0.07A @ 24V DC 0mA 0mA < 13mA Amperage Operating Current - when changing state 3.6A DC < 7.0A DC < 4.0A DC < 7.0A DC < 4.0A DC < 7.0A DC < 4.0A DC Switching Cycles 300,000 100,000 100,000 Coil Function Normally Open Magnetic Latching Bi-Stable Magnetic Latching Bi-Stable Magnetic Latching Auto-Releasing Remote Control Switch Included –– 2145 SPDT (ON)-OFF-(ON) 2145 SPDT (ON)-OFF-(ON) 2155 SPDT ON-ON Control Circuit Connection Tinned Wire Tinned Wire Tinned Wire Mounting #10 or M5 #10 or M5 #10 or M5 Terminal Stud Size 5/16" (M8) 3/8"-16 (M10) 3/8"-16 (M10) Terminal Stud Length 5/8" (16 mm) 7/8" (22 mm) 7/8" (22 mm) Maximum Terminal Stud Torque 90 in-lb (10.0 Nm) 140 in-lb (15.5 Nm) 140 in-lb (15.8 Nm) Cable Size to Meet Ratings 2/0 AWG (70mm²) 4/0 AWG (120 mm²) × 2 4/0 AWG (120 mm²) × 2 Terminal Ring Diameter Clearance not rated 1.12" (28.4 mm) 1.12" (28.4 mm) Width 3.17" (80.50 mm) 3.75" (95.2 mm) 3.75" (95.2 mm) Height 2.63" (66.80 mm) 5.47" (138.9 mm) 5.47" (138.9 mm) Depth 2.86" (72.64 mm) 2.03" (51.6 mm) 2.03" (51.6 mm) Ignition Protected ISO 8846 SAE J1171 ISO 8846, SAE J1171 ISO 8846, SAE J1171 Ingress Protected (see inside back cover) IP67 - protected against immersion up to 1 meter for 30 minutes IP66-protected against powerful water jets IP66-protected against powerful water jets Solenoid and Remote Battery Switch Specification Table
RkJQdWJsaXNoZXIy MjgzMDI=