ACME ELECTRIC
•
MILWAUKEE, WI
•
800.334.5214
•
acmetransformer.com
58
SECTION
TA SERIES OPEN CORE & COIL INDUSTRIAL CONTROL TRANSFORMERS
B
Catalog Number
VA
Type
PL79924*
50-1000
1/4
"
x 1-1/4
"
PL79930
50-350
13/32
"
x 1-1/2
"
PL79931
500-1000
13/32
"
x 1-1/2
"
Q
Mount secondary fuse clips on terminals X1 and F or F1
using the screws supplied with the transformer.
Q
Connect secondary load lines to terminals X2 and F or F2.
Use Jumper Link to connect F1 and F2.
Q
Use dual-element slow-blowing fuses such as Bussmann
MFG., Fusetron Type FNM, Littelfuse or Ferraz Shawmut
(not supplied with fuse kits).
* PL79924: Use fuse kit on all transformers except 750 & 1000 VA
with 24 volt secondary.
Secondary
Fuse Kit
1.
To attach secondary fuse kit PL 112603 to
primary fuse kits PL112700 thru PL112705
snap the secondary single pole fuse block
onto the unlabeled side of the primary double
pole fuse block. (See Figure 1)
2.
Install the fuse kits as instructed under the
primary fuse kit instructions on page 54.
3.
Select the appropriate pair of jumpers for
making the connections between the
secondary fuse block and the secondary
(X-side) of the transformer.
4.
Connect the female quick-connect of the
jumpers supplied to one of the male quick-
connects of the secondary fuse block—one
jumper to each end of the fuse block. (See
Figure 2)
5.
Connect the ring terminal of the jumpers
supplied to screw terminals X1 and F or F1
on the secondary (X-side) of the transformer.
6.
Connect secondary load lines to terminals
X2 and F or F2.
Figure 1
Figure 2
Instructions for TB Series Secondary Fuse Kit
Type PL112603: use dual element slow-blow fuse 13/32" x 1-1/2" (1.0 x 3.8 cm)
TB Series Secondary Fuse Kits
Type PL79924, PL79930, & PL79931: Use Dual Element Slow-Blow Fuse
